Kết nối phần cứng

C4 Max được xây dựng để đáp ứng các nhu cầu khắt khe trong thị trường xe tải và xe buýt với mức giá rất cạnh tranh.

1. Thông số kỹ thuật

Thông số kỹ thuật
erformance
Processor ARM 11 – 500 MHz
RAM 64 MBytes (ext to 128 MB)
NAND Flash 256 Mbytes (ext to 4 GB)
Communication
Modem Quad-band GSM/GPRS Or 3G (EU, US) or CDMA
GSM Antenna External (internal on option)
Positioning
GPS Receiver Sirf Atlas V (A-GPS on option)
GPS Antenna External (internal on option)
Interface & Telematics Features
3D Accelerometer ±2g; ±4g; ±8g
3 axis Gyroscope On option
Digital Inputs 3 (Ignition, alarm and 1 input active low)
Digital outputs 2 (Relay control & immobilizer on option)
Analog inputs 2
Mini USB 2.0 Host/Device/UART
1 wire 1
RTC 1
LEDs 2 (1 controlled by software)
Product Specific Features
CAN 2.0B interface Yes
RS232 2 (on option: 1 with RTS/CTS)
Bluetooth 2.1 EDR class 2 (with internal antenna)
J1708 If used, RS485 and RS422 are not available. J1708 is compatible with CAN option.
Half duplex RS485/RS422 (on option) If used, J1708 is not available. RS485 and RS422 are compatible with CAN option.
Cable Specific Features
ECM through optional iOBD cable
CAN 2.0B interface on option with iOBD Cable
RS232 on option with IBD Cable
Power Supply
External power supply 8- 32V Yes
External Voltage Measurement Yes, with wake up functionality
Li-ion battery & charger 900mAh
Environmental
Connectors microFIT 20 pins
Operating Temperature -30/+70°C without internal battery
Dimensions (mm) 88 x 54 x 17

2. Đặc tính kỹ thuật

Thông số kỹ thuật
erformance
Processor ARM 11 – 500 MHz
RAM 64 MBytes (ext to 128 MB)
NAND Flash 256 Mbytes (ext to 4 GB)
Communication
Modem Quad-band GSM/GPRS Or 3G (EU, US) or CDMA
GSM Antenna External (internal on option)
Positioning
GPS Receiver Sirf Atlas V (A-GPS on option)
GPS Antenna External (internal on option)
Interface & Telematics Features
3D Accelerometer ±2g; ±4g; ±8g
3 axis Gyroscope On option
Digital Inputs 3 (Ignition, alarm and 1 input active low)
Digital outputs 2 (Relay control & immobilizer on option)
Analog inputs 2
Mini USB 2.0 Host/Device/UART
1 wire 1
RTC 1
LEDs 2 (1 controlled by software)
Product Specific Features
CAN 2.0B interface Yes
RS232 2 (on option: 1 with RTS/CTS)
Bluetooth 2.1 EDR class 2 (with internal antenna)
J1708 If used, RS485 and RS422 are not available. J1708 is compatible with CAN option.
Half duplex RS485/RS422 (on option) If used, J1708 is not available. RS485 and RS422 are compatible with CAN option.
Cable Specific Features
ECM through optional iOBD cable
CAN 2.0B interface on option with iOBD Cable
RS232 on option with IBD Cable
Power Supply
External power supply 8- 32V Yes
External Voltage Measurement Yes, with wake up functionality
Li-ion battery & charger 900mAh
Environmental
Connectors microFIT 20 pins
Operating Temperature -30/+70°C without internal battery
Dimensions (mm) 88 x 54 x 17

3. Hướng dẫn sử dụng

Thông số kỹ thuật
erformance
Processor ARM 11 – 500 MHz
RAM 64 MBytes (ext to 128 MB)
NAND Flash 256 Mbytes (ext to 4 GB)
Communication
Modem Quad-band GSM/GPRS Or 3G (EU, US) or CDMA
GSM Antenna External (internal on option)
Positioning
GPS Receiver Sirf Atlas V (A-GPS on option)
GPS Antenna External (internal on option)
Interface & Telematics Features
3D Accelerometer ±2g; ±4g; ±8g
3 axis Gyroscope On option
Digital Inputs 3 (Ignition, alarm and 1 input active low)
Digital outputs 2 (Relay control & immobilizer on option)
Analog inputs 2
Mini USB 2.0 Host/Device/UART
1 wire 1
RTC 1
LEDs 2 (1 controlled by software)
Product Specific Features
CAN 2.0B interface Yes
RS232 2 (on option: 1 with RTS/CTS)
Bluetooth 2.1 EDR class 2 (with internal antenna)
J1708 If used, RS485 and RS422 are not available. J1708 is compatible with CAN option.
Half duplex RS485/RS422 (on option) If used, J1708 is not available. RS485 and RS422 are compatible with CAN option.
Cable Specific Features
ECM through optional iOBD cable
CAN 2.0B interface on option with iOBD Cable
RS232 on option with IBD Cable
Power Supply
External power supply 8- 32V Yes
External Voltage Measurement Yes, with wake up functionality
Li-ion battery & charger 900mAh
Environmental
Connectors microFIT 20 pins
Operating Temperature -30/+70°C without internal battery
Dimensions (mm) 88 x 54 x 17

4. Hướng dẫn kết nối

Thông số kỹ thuật
erformance
Processor ARM 11 – 500 MHz
RAM 64 MBytes (ext to 128 MB)
NAND Flash 256 Mbytes (ext to 4 GB)
Communication
Modem Quad-band GSM/GPRS Or 3G (EU, US) or CDMA
GSM Antenna External (internal on option)
Positioning
GPS Receiver Sirf Atlas V (A-GPS on option)
GPS Antenna External (internal on option)
Interface & Telematics Features
3D Accelerometer ±2g; ±4g; ±8g
3 axis Gyroscope On option
Digital Inputs 3 (Ignition, alarm and 1 input active low)
Digital outputs 2 (Relay control & immobilizer on option)
Analog inputs 2
Mini USB 2.0 Host/Device/UART
1 wire 1
RTC 1
LEDs 2 (1 controlled by software)
Product Specific Features
CAN 2.0B interface Yes
RS232 2 (on option: 1 with RTS/CTS)
Bluetooth 2.1 EDR class 2 (with internal antenna)
J1708 If used, RS485 and RS422 are not available. J1708 is compatible with CAN option.
Half duplex RS485/RS422 (on option) If used, J1708 is not available. RS485 and RS422 are compatible with CAN option.
Cable Specific Features
ECM through optional iOBD cable
CAN 2.0B interface on option with iOBD Cable
RS232 on option with IBD Cable
Power Supply
External power supply 8- 32V Yes
External Voltage Measurement Yes, with wake up functionality
Li-ion battery & charger 900mAh
Environmental
Connectors microFIT 20 pins
Operating Temperature -30/+70°C without internal battery
Dimensions (mm) 88 x 54 x 17

5. Liên hệ sản xuất

Thông số kỹ thuật
erformance
Processor ARM 11 – 500 MHz
RAM 64 MBytes (ext to 128 MB)
NAND Flash 256 Mbytes (ext to 4 GB)
Communication
Modem Quad-band GSM/GPRS Or 3G (EU, US) or CDMA
GSM Antenna External (internal on option)
Positioning
GPS Receiver Sirf Atlas V (A-GPS on option)
GPS Antenna External (internal on option)
Interface & Telematics Features
3D Accelerometer ±2g; ±4g; ±8g
3 axis Gyroscope On option
Digital Inputs 3 (Ignition, alarm and 1 input active low)
Digital outputs 2 (Relay control & immobilizer on option)
Analog inputs 2
Mini USB 2.0 Host/Device/UART
1 wire 1
RTC 1
LEDs 2 (1 controlled by software)
Product Specific Features
CAN 2.0B interface Yes
RS232 2 (on option: 1 with RTS/CTS)
Bluetooth 2.1 EDR class 2 (with internal antenna)
J1708 If used, RS485 and RS422 are not available. J1708 is compatible with CAN option.
Half duplex RS485/RS422 (on option) If used, J1708 is not available. RS485 and RS422 are compatible with CAN option.
Cable Specific Features
ECM through optional iOBD cable
CAN 2.0B interface on option with iOBD Cable
RS232 on option with IBD Cable
Power Supply
External power supply 8- 32V Yes
External Voltage Measurement Yes, with wake up functionality
Li-ion battery & charger 900mAh
Environmental
Connectors microFIT 20 pins
Operating Temperature -30/+70°C without internal battery
Dimensions (mm) 88 x 54 x 17